Description
The monitor uses the oscillometric method to measure blood pressure.
The automatic electronic blood pressure monitor is intended for use by medical professionals or at home to monitor and display diastolic, systolic blood pressure and heart rate on adults.

Technical specifications

Measurement method	Oscillometric measurement
Indication	Digital LED display
Measuring range	Pressure: 30-280 mmHg Heart rate: 40-199 beats/minute
Precision	Static pressure: ±3 mmHg Pulse: ±5%
Memory	90 measurements
Diet	4 x 1.5V batteries (LR03 or AAA)
Operating conditions	Temperature: 5°C to 40°C Relative humidity: 15-93% Atmospheric pressure: 70-106 kPa
Storage conditions	Temperature: -20°C to +55°C Relative humidity: 0-93% Atmospheric pressure: 50-106 kPa
Dimensions	approx. 93mm (W) x 161mm (H) x 47mm (D)
Classification	Type BF
Upper arm circumference	22-32 cm
Operating mode	Continuous operation
AC adapter	Input: 100-240V, 50/60Hz, 0.2A Output: 6V 500mA

How to use
Insert or replace batteries
Remove the battery cover. Insert new batteries into the battery compartment, making sure the polarity is correct. Close the battery cover. Use only LR03 or AAA batteries.

When the low battery indicator flashes on the display, replace the batteries.
Do not mix old and new batteries. This may shorten battery life or cause the device to malfunction.
Use only the specified batteries. The batteries supplied with the device are for testing the monitor's performance and may have a shorter lifespan.
Replace worn batteries with their polarities in the correct direction.
If you will not use the unit for a long period of time (about three months or more), remove the batteries.

Attaching the cuff to the arm
Wrap the cuff around your upper arm, about 2-3 cm above the elbow. Place the cuff directly on your skin, as clothing can cause a weak pulse and result in incorrect measurements.
Constriction of the upper arm, caused by rolling up a shirt or t-shirt sleeve, can prevent accurate readings.
Secure the cuff with the Velcro strip so it's comfortable and not too tight. Rest your arm on the table (palm up) so that the cuff is at the same height as your heart. Make sure the tube is not kinked.

Blood pressure measurement
To measure your blood pressure, sit comfortably without crossing your legs, with your feet flat on the floor. Remain still and quiet during the measurement.
Press the ON/OFF button; all icons will appear on the display for two seconds, then switch to measurement and display "0" or the last measurement record. Start measurement; the cuff will inflate automatically. The heart symbol will flash on the LED. Once the measurement is complete, the results will appear on the display.
Measure your blood pressure at approximately the same time every day.
Don't measure immediately after exercise or bathing. Rest for twenty to thirty minutes before taking the measurement.

Cleaning and maintenance
Clean the monitor with a soft, dry cloth. Do not use any cleaning solutions.
Do not immerse the device or any component in water.
Clean the bracelet after each use. Wipe the inside (skin contact) of the bracelet thoroughly with a soft cloth lightly moistened with 75% ethyl alcohol three times. Replace the cloth after each use. Then air dry the bracelet.

Warnings
If you are taking any medications, consult your doctor to determine the best time to measure your blood pressure. Never change a prescribed medication without first consulting your doctor.
For people with irregular or unstable peripheral circulation problems due to diabetes, liver disease, hardening of the arteries, etc., there may be fluctuations in blood pressure values ​​measured at the upper arm compared to the wrist.
Measurements may be affected if this device is used near televisions, microwave ovens, X-ray equipment, cell phones, or other devices with strong electrical fields. To avoid such interference, use the monitor at a sufficient distance from such devices or turn them off.
Wash hands before use.
Do not measure on the arm that has been using ME equipment monitoring at the same time, otherwise it may cause loss of function.
Batteries with liquid on their surface or that have been modified cannot be inserted into products.
Short circuiting of the battery must be avoided.
Battery life varies with ambient temperature and may be reduced at low temperatures.
Do not immerse the device or any of its components in water.
Do not expose the monitor to extremely hot or cold temperatures, humidity, or direct sunlight.
Do not subject the monitor to strong shocks.

Format
1 piece

Cod. MC1001