Proteggi il tuo ordine durante la spedizione Aggiungi una Busta termica - solo 1,50€ AGGIUNGI AL CARRELLO >>
Le immagini potrebbero non essere rappresentative del prodotto
BIATAIN POLYURETHANE FOAM DRESSING WITH SILICONE ADHESIVE EDGE 10X20 CM 5 PIECES
Descrizione Prodotto
€53,68
-11%
€48,31
Regular price
€48,31
Unit price
per
There are only a few pieces left
Available
971217486
5708932026147
disponibile
Mon - Fri 9-13 / 14-17
+39 0863 599589
366 2291710
Descrizione
Pagamenti
Spedizioni
Descriptive sheet
Biatain Silicone
Adhesive polyurethane foam.
Product manufactured without natural rubber latex.
Does not contain phthalates.
Description
The new Biatain Silicone is a multi-layered absorbent dressing composed of two absorbent layers, two polyurethane film layers, one outer and one inner, and a pressure sensitive adhesive (PSA) that holds the two absorbent layers together.
The last layer, in contact with the lesion and the skin, is made of delicate perforated adhesive silicone.
The first absorbent layer, covered in perforated silicone, is made of Biatain polyurethane foam, multi-layered, hydrophilic, with a vertical honeycomb structure.
Thanks to the special 3D vertical alveolar technology, it absorbs and prevents the release of exudate even under compression, thus creating the ideal moist environment for the wound healing process, and avoiding maceration of the perilesional skin.
The polyurethane foam is positioned without steps at the same level as the lesion, avoiding any pressure marks on the periwound skin.
In contact with the exudate, the foam conforms optimally to the wound bed, reducing dead spaces where bacteria can nest.
The second absorbent layer, above the first, in contact with the external polyurethane film, is a hydrocapillary superabsorbent pad made of polyethylene, cellulose fibres (CMC) and SAP (Super Absorbent Particles in sodium polyacrylate polymers).
The instant absorption of excess exudate passing through the first layer of polyurethane foam gives the super absorbent pad the hydrocapillary effect: fluids are absorbed vertically and distributed both vertically and horizontally.
In fact, the cellulose and SAP polymers in contact with the exudate change phase, gelling.
The gel that forms helps maintain the optimal moist environment for wound healing and ensures a high level of retention even under compression.
The two absorbent layers are held together by PSA, Pressure Sensitive Adhesive, which prevents delamination of the absorbent layers when they come into contact with moisture following absorption of exudate.
The external polyurethane film layer, in direct contact with the Superabsorbent layer, creates a barrier against exogenous bacteria and external pollutants and ensures high breathability. It also guarantees optimal fluid management thanks to its high permeability.
The internal polyurethane film layer that adheres to the polyurethane foam on one side and the silicone on the other, creates an intermediate layer that prevents delamination of the foam in humid environments.
The external adhesive silicone layer in contact with the lesion and the skin is perforated (with patented Coloplast technology) along the entire surface of both the foam and the edge.
The silicone adhesive layer is gentle and does not cause trauma to the wound during dressing changes and application.
The perforation in the polyurethane foam allows the passage of exudate towards the absorbent layer of the dressing, and also ensures secure adhesion of the dressing.
Perforations on the edges ensure adequate breathability and evaporation of moisture from the skin.
Directions
Acute and chronic skin lesions with medium to highly exuding exudates.
Biatain Silicone helps prevent post-operative blistering.
Average dwell time (medium to highly exuding lesions and ulcers): 3-4 days.
Maximum time on site: 7 days.
Contraindications and incompatibilities
In case of allergic reactions, please contact Coloplast for information on the components.
Biatain dressings and secondary dressings must be removed prior to radiation treatment (X-ray, ultrasound, diathermy and microwave).
Do not use Biatain dressings with oxidizing solutions such as hypochlorite and hydrogen peroxide.
Composition
External and internal polyurethane film, polyurethane foam, cellulose fibres (CMC), sodium polyacrylate, polyethylene, adhesive (PSA), perforated silicone adhesive layer.
Sterilization
Biatain Silicone is sterilized with ethylene oxide.
Each package has the batch number and expiry date.
Validity
3 years from date of manufacture, unless otherwise indicated on the packaging.
Codes
Packaging
Indications on Primary Packaging (Unit of Use)
Single-use product, CE marking, manufacturer's indication, production batch code, expiry date, manufacturing indication without natural rubber latex, microbiological status (sterility by irradiation), handling information, instructions for use.
Product storage
Products must be stored at room temperature (25°C).
Disposal
The product does not contain ecotoxic components and therefore does not require special disposal protocols.
Do not dispose of in the environment as it is not biodegradable.
Product manufactured without natural rubber latex.
Does not contain phthalates.
Description
The new Biatain Silicone is a multi-layered absorbent dressing composed of two absorbent layers, two polyurethane film layers, one outer and one inner, and a pressure sensitive adhesive (PSA) that holds the two absorbent layers together.
The last layer, in contact with the lesion and the skin, is made of delicate perforated adhesive silicone.
The first absorbent layer, covered in perforated silicone, is made of Biatain polyurethane foam, multi-layered, hydrophilic, with a vertical honeycomb structure.
Thanks to the special 3D vertical alveolar technology, it absorbs and prevents the release of exudate even under compression, thus creating the ideal moist environment for the wound healing process, and avoiding maceration of the perilesional skin.
The polyurethane foam is positioned without steps at the same level as the lesion, avoiding any pressure marks on the periwound skin.
In contact with the exudate, the foam conforms optimally to the wound bed, reducing dead spaces where bacteria can nest.
The second absorbent layer, above the first, in contact with the external polyurethane film, is a hydrocapillary superabsorbent pad made of polyethylene, cellulose fibres (CMC) and SAP (Super Absorbent Particles in sodium polyacrylate polymers).
The instant absorption of excess exudate passing through the first layer of polyurethane foam gives the super absorbent pad the hydrocapillary effect: fluids are absorbed vertically and distributed both vertically and horizontally.
In fact, the cellulose and SAP polymers in contact with the exudate change phase, gelling.
The gel that forms helps maintain the optimal moist environment for wound healing and ensures a high level of retention even under compression.
The two absorbent layers are held together by PSA, Pressure Sensitive Adhesive, which prevents delamination of the absorbent layers when they come into contact with moisture following absorption of exudate.
The external polyurethane film layer, in direct contact with the Superabsorbent layer, creates a barrier against exogenous bacteria and external pollutants and ensures high breathability. It also guarantees optimal fluid management thanks to its high permeability.
The internal polyurethane film layer that adheres to the polyurethane foam on one side and the silicone on the other, creates an intermediate layer that prevents delamination of the foam in humid environments.
The external adhesive silicone layer in contact with the lesion and the skin is perforated (with patented Coloplast technology) along the entire surface of both the foam and the edge.
The silicone adhesive layer is gentle and does not cause trauma to the wound during dressing changes and application.
The perforation in the polyurethane foam allows the passage of exudate towards the absorbent layer of the dressing, and also ensures secure adhesion of the dressing.
Perforations on the edges ensure adequate breathability and evaporation of moisture from the skin.
Directions
Acute and chronic skin lesions with medium to highly exuding exudates.
Biatain Silicone helps prevent post-operative blistering.
Average dwell time (medium to highly exuding lesions and ulcers): 3-4 days.
Maximum time on site: 7 days.
Contraindications and incompatibilities
In case of allergic reactions, please contact Coloplast for information on the components.
Biatain dressings and secondary dressings must be removed prior to radiation treatment (X-ray, ultrasound, diathermy and microwave).
Do not use Biatain dressings with oxidizing solutions such as hypochlorite and hydrogen peroxide.
Composition
External and internal polyurethane film, polyurethane foam, cellulose fibres (CMC), sodium polyacrylate, polyethylene, adhesive (PSA), perforated silicone adhesive layer.
| Product | Absorption g/m 2 , 1 hour | Absorption g/m 2 , 24 hours | Absorption under compression g/m 2 , 24 hours | Permeability (MVTR) g/m 2 , 24 hours | Fluid Handling (FHC) g/m 2 , 24 hours |
| Super-absorbent polyurethane foam dressing with silicone adhesive layer | 13860 | 9100 | 10460 | 7400 | 16500 |
Sterilization
Biatain Silicone is sterilized with ethylene oxide.
Each package has the batch number and expiry date.
Validity
3 years from date of manufacture, unless otherwise indicated on the packaging.
Codes
| Type | Commercial Code | Size (cm) | CND Code | ISO code | GMDN Code |
| Super-absorbent polyurethane foam dressing with silicone adhesive | 33434 | 7.5x7.5 | M04040602 | 09.21.12.003 | 44970 |
| Super-absorbent polyurethane foam dressing with silicone adhesive | 33435 | 10x10 | M04040602 | 09.21.12.003 | 44970 |
| Super-absorbent polyurethane foam dressing with silicone adhesive | 33436 | 12.5x12.5 | M04040602 | 09.21.12.003 | 44970 |
| Super-absorbent polyurethane foam dressing with silicone adhesive | 33437 | 15x15 | M04040602 | 09.21.12.003 | 44970 |
| Super-absorbent polyurethane foam dressing with silicone adhesive | 33438 | 17.5x17.5 | M04040602 | 09.21.12.006 | 44970 |
| Super-absorbent polyurethane foam dressing with silicone adhesive | 33400 | 10x20 | M04040602 | 09.21.12.003 | 44970 |
| Super-absorbent polyurethane foam dressing with silicone adhesive | 33401 | 10x30 | M04040602 | 09.21.12.006 | 44970 |
| Super-absorbent polyurethane foam dressing with silicone adhesive | 33404 | 15x19 Sacred | M04040602 | 09.21.12.012 | 44970 |
| Super-absorbent polyurethane foam dressing with silicone adhesive | 33405 | 25x25 Sacred | M04040602 | 09.21.12.012 | 44970 |
| Super-absorbent polyurethane foam dressing with silicone adhesive | 33406 | 18x18 Heel | M04040602 | 09.21.12.012 | 44970 |
| Super-absorbent polyurethane foam dressing with silicone adhesive | 33408 | 14x19.5 Multisite | M04040602 | 09.21.12.012 | 44970 |
Packaging
| Unit of use | 1 dressing in single pack |
| 33434 | 10 units of use 135 x 147 mm |
| 33435 | 10 units of use 165 x 177 mm |
| 33436 | 10 units of use 166 x 177 mm |
| 33437 | 5 units of use 220 x 227 mm |
| 33438 | 5 units of use 226 x 227 mm |
| 33400 | 5 units of use 150 x 250 mm |
| 33401 | 5 units of use 350 x 150 mm |
| 33404 | 5 units of use 200 x 250 mm |
| 33405 | 5 units of use 300 x 300 mm |
| 33406 | 5 units of use 230 x 250 mm |
| 33408 | 5 units of use 190 x 250 mm |
Indications on Primary Packaging (Unit of Use)
Single-use product, CE marking, manufacturer's indication, production batch code, expiry date, manufacturing indication without natural rubber latex, microbiological status (sterility by irradiation), handling information, instructions for use.
Product storage
Products must be stored at room temperature (25°C).
Disposal
The product does not contain ecotoxic components and therefore does not require special disposal protocols.
Do not dispose of in the environment as it is not biodegradable.
| CREDIT CARD: | Pay securely with your credit card (including prepaid cards). | ||
| PAYPAL: | Pay for your order with your PayPal account, in one payment or by choosing to pay in installments (eligibility for Pay in 3 installments is subject to approval). Available for purchases between €30 and €2,000. |
||
| KLARNA: | Buy now, pay later with Klarna, pay in 3 interest-free installments. Split your payment into 3 installments to spread the cost of your purchase over time. The first payment will be made when your order is processed, while subsequent payments will be taken every 30 days from a debit or credit card of your choice. Minimum amount: €35 - Maximum amount: €1,500 |
||
| SHOP PAY: | Shop Pay is a payment service provider, owned by Shopify, that allows customers to save data such as their email address, credit card (or any card used), shipping address, and any billing information after completing a purchase. This tool is very useful because it allows customers to pay quickly and without having to re-enter all their data using an OTP code. How to pay in installments with Shop Pay? First, the customer must select the “Shop Pay installment” option, which gives the possibility of making the payment in 4 installments of the same amount. Once this is done, the customer must select the debit or credit card to pay the first installment and then the subsequent ones. |
||
| GPAY: | Google Pay (now part of Google Wallet) is a digital payment system that lets you make payments in physical stores, apps, and websites using your smartphone or smartwatch. To pay in-store, simply hold your device close to the contactless POS terminal and unlock it, without needing to open the app. For online payments, select Google Pay as your payment method and confirm your purchase. |
||
| WIRE TRANSFER: | You can pay for your order by bank transfer, entering the details received in the order confirmation email. Important - as the REASON FOR PAYMENT, please enter the "Order Reference" number. |
Bank details: BNL BNP PARIBAS BANK - Branch No. 3646 AVEZZANO IN THE NAME OF: STORNELLI FARMACY SNC OF DR. FRANCA STORNELLI & C REASON: ORDER NUMBER IBAN IT87D0100540440000000018373 |
|
| MARK: | Cash on delivery with a €5.00 supplement | ||
| SHIPPING COSTS: | For orders up to €39.90 shipping costs €4.90 | |
| For orders over €39.90 free shipping | ||
| Shipments via GLS/BRT express courier: | The order is usually prepared within the day following the order placement, with delivery expected within 48/72 hours after the order has been processed. Saturdays, Sundays and public holidays are excluded from these times. | |
| Further details: | For all information on shipping methods and international shipping costs, please visit the dedicated page. | |
NOTA BENE: le informazioni presenti nelle schede prodotto che potrete consultare in questo sito non devono essere interpretate come consulenza medica e non intendono, né possono sostituire le prescrizioni mediche. Le immagini, se presenti, sono fornite al solo scopo illustrativo e non costituiscono elemento identificativo.